What’s Packed
12 and 24 volt for Receiver and
Stand-alone Model
- Compressor with high quality Briggs and Straton Air Filter and Polyurethane pre-filter sock.
- 12 volt model = 2 x 2000mm long 35mm square (2AWG / 2B&S ) electric cables with crimped terminals on each end having 8 mm holes.
- 24 volt model = 2 x 2000mm long 16mm square (4AWG /4B&S ) electric cables with crimped terminals on each end having 8 mm holes.
- Manual Resetable circuit breaker 250 Amp for 12 volt and 150 Amp for 24 volt.
- Air hose - 10metre x 10mm internal hole diameter High temperature red rubber hose with genuine “Nitto” Quick connect couplings on each end.
- High pressure flexible hose with a non-return valve for coupling compressor outlet to receiver with ¼ inch BSP female outlet plus ¼ inch male adapter.
- 5 port Manifold with holes at each end and one underneath opposite the 5 ports. All ports and holes tapped ¼ BSP parallel thread. 2 threaded plugs and one male /male adapter are supplied so that various configurations can be adapted to a specific situation and directly mounted onto a receiver for convenience if required.
- One way valve, for inlet side of manifold
- Pressure switch typically 90-120 psi (630-840 Kpa) on/off range.
- 150 PSI (1050 Kpa) safety relief valve.
- High quality air pressure gauge.
- Nitto style female outlet coupling.
- Warranty registration sheet.
- Warranty statement for your records.
- Customer support -contact details.
- 1 x Owners Manual plus 2 “serious Air” business cards.
- 1x quality "Valveless' tire inflator.
- 1 x pair Australian Std safety glasses.
- 1 x Blow gun with 2.5 mm hole.
- 1 x Isolation switch (Toggle switch with rubber booty)
Note 1. Receiver tank not included and in most cases not required.