SPECIFICATIONS 24 Volt SeriousAir:
Size:L 403mm x W 143 x H 252mm (Standard configuration)L 403mm x W 235 x H 155mm (Rotated configuration - can be ordered) Weight: 14.8 kg (Not including hoses and cables)
Capacity: Unrestricted, 275 Ltr/min (9.74 cu ft/min) At 80 PSI (560 Kpa) pumping tyre 206 Ltr/min (7.3 cu ft/min)
Current draw: No load: Through Nitto type “Quick connect” fitting on outlet = 130-150 Amp. Loaded: Pumping through 10metre hose and tyre valve = 200-220 Amp.
RPM: Unloaded: = 3000 RPM Loaded: pumping at 80 PSI (560 Kpa) = 2075 RPM
Temperature: After 2minutes continuous pumping (ambient temp 20 deg)
Motor = 38 degrees C. Compressor (motor end) 60 Deg C; Discharge Port 130 deg C.
Performance:(1) Pumping into “Cooper ST” 285 x 75-R16 (through tyre valve) 60 seconds 0-29 psi (0 - 203 Kpa) 90 seconds 0 - 45 psi (0 - 315 Kpa)(2) Pumping into “Bridgestone #693” 265 x 75 R16 (through tyre valve) 2minutes = 64 PSI (0- 448 Kpa)(3) Pumping Semi-trailer tyres using Nitto free flow adapter (Supplied with compressor):
Tyre size: D660 x 22.5R “Dunlop”: 4.5 minutes 0 – 100 PSI (0 – 700 Kpa).(4) Tyre size: 295 x 80 x 22.5R “Yokohama” (Semi Trailer Tyre): 5.0 minutes = 0 – 100 PSI ( 0 -700 Kpa).
Duty Cycle: In well ventilated spaces using “Nitto” free-flow adapter or "Valveless" inflator (Supplied) equals 40%This means 4 minutes run time followed by 6 minutes rest on a ten minute cycleIn very hot weather, plus 36 deg C, reduce duty cycle to 30% i.e. 3 min. run time followed by 7 min. rest !Thermal overload, auto re-set is fitted (58 deg C - 70 deg C) from Serial No. 3300523 onward.
Typical Use: Pump up 4 tyres from16 - 36PSI (112 - 252 Kpa) takes 4 x 18 sec = 1minute 12 seconds of use.
Note: The 12 volt compressor looks exactly the same as the 24 volt one.
Duty Cycle: In well ventilated spaces using “Nitto” free-flow adapter or "Valveless" inflator (Supplied) equals 40%This means 4 minutes run time followed by 6 minutes rest on a ten minute cycleIn very hot weather, plus 36 deg C, reduce duty cycle to 30% i.e. 3 min. run time followed by 7 min. rest !Thermal overload, auto re-set is fitted (58 deg C - 70 deg C) from Serial No. 3300523 onward.
Typical Use: Pump up 4 tyres from16 - 36PSI (112 - 252 Kpa) takes 4 x 18 sec = 1minute 12 seconds of use.
Note: The 12 volt compressor looks exactly the same as the 24 volt one.